KN95 Automatic Folding Mask Machine( All Electric )

  • KN95 Automatic Folding Mask Machine( All Electric )

    Advantage:

    1.The machine is by motor drive, and the electrical control system is controlled by bus-mastering.
    2.PLC program control, servo drive, touch screen operation, accurate transmission, adjustable speed;
    3.The whole machine through CE certification, high safety factor;
    4.The raw material is fixed by air expansion shaft, and the feeding is controlled by constant tension.
    5.Short-break material detection system, reduce waste, reduce costs.
    6.5 layer N95 mask c an be produced according to customer requirements;

    7.High stability, low failure rate, high qualified rate of finished products, beautiful and solid without rust;

    Equipment main data:

    (1)Equipment dimension :L10000mm*W1600mm*H2100mm;

    (2)Color : beige, with this standard if without special instructions

    (3) Power : 220VAC±5﹪,50/60HZ, 15KW;

    (4)Environment :Temp 10~35℃、Humidity 5–35%HR,; No flammable, corrosive gas, no dust; ;

    (5)Production capacity :40–60Slices/minute (related to material) 60–80 pieces/min (material dependent ;

    (6)Quality rate :98%(raw material and operator case excluded )。

     

    Raw material parameters for reference :

    Outer layer non-woven:Width 250mm, weight 50g, outer diameter 700mm, reel 75mm

    Second-layer melt-blown cloth:Width 250mm, weight 25g, outer diameter 700mm, reel 75mm

    Third-layer hot air cotton:Width 250mm, weight 50g, outer diameter 700mm, reel 75mm

    Fourth-layer melt-blown:Width 250mm, weight 25g, outer diameter 700mm, reel 75mm

    Fifty-layer non-woven:Width 250mm, weight 25g, outer diameter 700mm, reel 75mm

    Sponge strip :Length 90mm, width 10mm, thickness 4mm

    Ear loop: flat ear strap (4mm — 6mm)

    Nose wire: double core, all plastic, roll diameter 300mm.