Forums » Off-Topic Discussions

Plastic Injection Molding

    • 2979 posts
    May 9, 2023 11:33 PM EDT

    Plastic Injection Molding

    Since John Wesley Hyatt and his brother Isaiah patented the first basic plunger plastic injection molding machine in 1872 there have been many changes. They only had celluloid plastic available at the time, now we have hundreds of choices. As to be expected, their machine was crude, they could never have foreseen the capabilities of the modern machines. As engineers and industrial designers increase the complexity of plastic injection molded components, machinery manufacturers and chemical companies rise to meet the new challenges that they create and deliver solutions. W&S is always in touch with the latest developments in industry innovations and are able to deliver the best advice and solutions for your applications.To get more news about 2k injection molding, you can visit asm-mold.com official website.

    Injection molding can be described in simple terms as the high pressure injection of liquid plastic raw material into a mold which shapes, cools and solidifies the polymer into the desired shape.

    Our Sydney Australia plant has injection molding machines that range from 20 tonne clamping capacity to 700 tonne and our Johor, Malaysia has machines from 80 tonne to 350 tonne.

    No matter your application, we have a machine to suit including multi-component (2K) molding.

    Our latest Engel Molding machines in both our Sydney and Johor, Malaysia plants have state-of-the-art technology including:-
    IQ weight control – a system that monitors and controls the injection process to ensure accurate shot weight by altering parameters to suit changes in material viscosity due to variations in ambient conditions and material variation. If you are interested in this technology you can read more here.
    IQ clamp control – a system that monitors and controls the clamp process to ensure that sufficient clamping force is maintained throughout the process. This minimises the risk of flash and ensures the safety of the mold tool. If you are interested in this technology you can read more here.
    Servo drive units – all major functions of these machines are powered by electric servo motors. This increases efficiency and accuracy.
    Our Engel Duo injection molding machines are manufactured to a two platen design providing savings in energy consumption on mold movement and occupying much less floor space than conventional three platen machines.
    Most of the materials that we process are hygroscopic (they absorb moisture from the air) so they must be dried prior to processing.
    In Sydney we have Moretto central drying equipment and in Johor we use Motan drying equipment. Both utilize silicon desiccant technology to dry the air to -40°C dew point prior to heating it to the recommended temperature for drying the plastic. With this, we are assured that our materials are properly prepared for processing.

    The plastic raw materials that we use are delivered to us in 25kg bags or 1,000kg bulk bags

    In both plants, the drying equipment is segregated from the production areas to eliminate fine dusts, and reduce the risk of plastic granules contaminating finished goods, making the workplace dirty or creating slip hazards.